Features
- 2mm or 3mm acrylic mirror face
- Pure reflective coating
- Aluminium Support Bar
- Vinyl extrusion
- Includes J-Bracket to fix to wall or ceiling (Mounting screws Not included).
Suitable Uses
- Retail and Store Security
- Office Security
- Reception Areas
- Hospitals and Schools
- Visitor Detection
- Other Indoor Observation Uses
Specifications
International Product Codes
Product Code | Size Diameter | View Distance | Mirror Face | Mirror Back | Bracket Length |
---|---|---|---|---|---|
18330A | 600x400mm | Up to 13' | 2mm Acrylic | Aluminium Bar | 360mm |
18332A | 800x600mm | Up to 17m | 3mm Acrylic | Aluminium Bar | 360mm |
Download PDF Information Sheet View
US Product Codes
Product Code | Size Diameter | View Distance | Mirror Face | Mirror Back | Bracket Length |
---|---|---|---|---|---|
68330A | 24"x16"mm | Up to 42' | 2mm Acrylic | Aluminum Bar | 10" |
68332A | 32"x24"mm | Up to 55' | 3mm Acrylic | Aluminium Bar | 10" |
Download PDF Information Sheet View
Usage Guides
Positioning
Installation Guide
Space Saver Convex Mirror Installation Guide:
-
Decide the appropriate place to site the mirror to give maximum vision.
-
Fix J-Bracket to wall or ceiling using suitable fixing hardware (ie: screws, bolts). Allowing enough room to get the mirror on to the J-Bracket.
-
Thread adaptor through the Aluminium Bar into the Hex Nut and tighten
-
Peel protective film off around the immediate edge of the mirror.
-
Slide the adaptor and mirror over the J-Bracket and adjust mirror to the desired position.
-
Tighten the locking bolt on the adaptor securely.Totally remove protective film from the mirror face.
Installation:
Download PDF Installation Guide View
Cleaning Guide
Acrylic Mirror Cleaning Guide:
General Cleaning:
DuraVisionTM recommend cleanning their acrylic mirror faces with soap and water and then with a clean, soft, lint free, damp cloth. Use a non-abrasive polish, such as Johnson’s Pledge or Mr Sheen for a clear bright reflection.
Saturate a clean soft cloth with polish, then spray the mirror face with polish. Wipe the wetted cloth over the mirror surface. With a another clean dry cloth buff the mirror face until it is clear of polish.
DO NOT USE:
- abrasives
- acids
- solvents such as petrol and laquer thinners
Graffiti Removal:
Any graffiti should be removed from the mirror face as soon as possible and preferably within 24 hours. To remove graffiti, use a non-abrasive substance such as De-Solv-it Stain Remover. Not all graffiti cleaning agents are suitable. Failure to use an approved cleaning agent may damage the mirror surface.
Scratches:
To remove scratches or repair blemishes on acrylic mirror faces only, use the following products:
- For cleaning use NOVUS plastic polish #1
- For fine scratches use NOVUS plastic polish #2
- For badly scratched surfaces use NOVIS plastic polish #3 followed by #2 and #1.
Download PDF Cleaning Guide View