Features

  • Premium quality acrylic mirror face
  • ASA Vinyl back
  • Stainless steel bracket and fixings (also available in galvanised steel option)
  • Orange vinyl extrusion for visibility in the factory setting
  • Unique J-Bracket for easy installation and adjustment

Suitable Uses

  • Hygiene and safety environments
  • Monitoring processes and machinery
  • Regular cleaning regimes
  • Prevent production line blockages and jams

Specifications

International Product Codes

Product Code Size Diameter View Distance Mirror Face Mirror Back Bracket Length
18220V 300mm Up to 21m 2mm Acrylic ASA Vinyl 250mm S/Steel J-Bracket
18244V 450mm Up to 28m 2mm Acrylic ASA Vinyl 250mm S/Steel J-Bracket
18266V 600mm Up to 38m 2mm Acrylic ASA Vinyl 335mm S/Steel J-Bracket
18287V 800mm Up to 50m 3mm Acrylic ASA Vinyl 335mm S/Steel J-Bracket
18295V 1000mm Over 50m 3mm Acrylic 10mm Celuka 335mm S/Steel J-Bracket

Download PDF Information Guide  View

Usage Guides

Positioning

Food mirror 1 Food mirror 2

Installation Guide

Food Processing Mirror Installation Guide:

  1. Decide the appropriate place to site the mirror to give maximum vision.

  2. Fix J-Bracket to wall or ceiling using suitable fixing hardware (ie: screws, bolts). Allowing enough room to get the mirror on to the J-Bracket.

  3. Peel back the protective film from the edge of the mirror face, so that it is easy to pull off once installed.

  4. Thread adaptor into the back of the mirror

  5. Slide the adaptor and mirror over the J-Bracket and adjust mirror to the desired position.

  6. Tighten the locking bolt on the adaptor securely.

  7. Completely remove the protective film.

J-Assembly1.jpg J-Assembly2.jpg J-Assembly3.jpg J-Assembly4.jpg

J-Assembly5.jpg J-Assembly6.jpg J-Assembly7.jpg J-Assembly7.jpg

Download PDF Installation Guide  View

Cleaning Guide

Acrylic Mirror Cleaning Guide:

General Cleaning:
DuraVisionTM recommend cleanning their acrylic mirror faces with soap and water and then with a clean, soft, lint free, damp cloth. Use a non-abrasive polish, such as Johnson’s Pledge or Mr Sheen for a clear bright reflection.

Saturate a clean soft cloth with polish, then spray the mirror face with polish. Wipe the wetted cloth over the mirror surface. With a another clean dry cloth buff the mirror face until it is clear of polish.

DO NOT USE:

  • abrasives
  • acids
  • solvents such as petrol and laquer thinners

Graffiti Removal:
Any graffiti should be removed from the mirror face as soon as possible and preferably within 24 hours. To remove graffiti, use a non-abrasive substance such as De-Solv-it Stain Remover. Not all graffiti cleaning agents are suitable. Failure to use an approved cleaning agent may damage the mirror surface.

Scratches:
To remove scratches or repair blemishes on acrylic mirror faces only, use the following products:

  • For cleaning use NOVUS plastic polish #1
  • For fine scratches use NOVUS plastic polish #2
  • For badly scratched surfaces use NOVIS plastic polish #3 followed by #2 and #1.

Download PDF Acrylic Mirror Cleaning Guide View