Features

  • 304 grade 18 gauge stainless steel mirror face
  • Large radius of curvature for minimum distance distortion
  • Orange powder coated hood
  • Vinyl celuka back
  • Orange vinyl extrusion
  • Outdoor strength pole mount fittings to fit 75mm dia. pole
  • Wall mounting adaptor available for clamp style bracket

Suitable Uses

  • Road and Traffic Safety
  • Railway and Subway Platforms
  • Extreme Weather Conditions
  • Coastal Environments
  • Driveways and Carparks
  • Outdoor Security aound Buildings
  • Security Checkpoints and Boarder Control

Specifications

International Product Codes

Product Code Size Diameter View Distance Mirror Face Mirror Back Bracket Length
16029J 300mm Up to 23m Stainless Steel Vinyl Celuka 270mm J-Bracket and 75mm dia. U-Bolts
16047J 450mm Up to 32m Stainless Steel Vinyl Celuka 270mm J-Bracket and 75mm dia. U-Bolts
16066C 600mm Up to 42m Stainless Steel Vinyl Celuka 75mm dia. Pole Clamp
16087C 800mm Up to 60m Stainless Steel Vinyl Celuka 75mm dia. Pole Clamp
16445C 1000mm Up to 65m Stainless Steel Vinyl Celuka 75mm dia. Pole Clamp

Download PDF Information Guide  View

US Product Codes

Product Code Size Diameter View Distance Mirror Face Mirror Back Bracket Length
66066C 24" Up to 140' Stainless Steel Vinyl Celuka 3" dia. Pole Clamp
66087C 32" Up to 200' Stainless Steel Vinyl Celuka 3" dia. Pole Clamp
66445C 40" Up to 220' Stainless Steel Vinyl Celuka 3" dia. Pole Clamp

Download PDF Information Guide  View

Usage Guides

Positioning

traffic mirror 1 traffic mirror 2 traffic mirror 3

Installation Guide

Outdoor DeLuxe Traffic Stainless Steel Installation Guide:

 

Installation to 75mm Pole.

  1. Decide the appropriate place to site the mirror on a 75mm pole.

  2. Fix clamp and mirror mount assembly to the pole.

  3. Make sure adjustment slot is to the bottom

  4. Fix the mirror to the clamp bracket assembly.

  5. Once the desired position has been found, tighten the bolts and nuts securely.

 

Clamp-Assembly1.jpg Clamp-Assembly2.jpg Clamp-Assembly3.jpg

 

Installation to an Extra Large Pole (With Optional Wall Mount Adaptor)

  1. When mounting to an extra large pole (eg: Power Pole, Lamp Post, Large Piller) use steel strapping to secure the Wall Mount Adaptor to the large pole.

  2. Fix clamp and mirror mount assembly to the Wall Mount Adaptor, as below (see Wall Mount Adaptor Installation).

Wall Adaptor 5 Wall Adaptor 5

 

Optional Wall Mount Adaptor:

  1. Decide the appropriate place to site the mirror on a flat surface (wall, fence, building etc).

  2. Fix Wall Mounting Adaptor using appropriate screws.

  3. Fix clamp and mirror mount assembly to the Wall Mount Adaptor.

  4. Make sure adjustment slot is to the bottom

  5. Fix the mirror to the clamp bracket assembly.

  6. Once the desired position has been found, tighten the bolts and nuts securely.

Wall Adaptor 1 Wall Adaptor 2 Wall Adaptor 3 Wall Adaptor 4

Download PDF Installation Guide  View

Cleaning Guide

Stainless Steel Mirror Cleaning Guide:

General Cleaning:
DuraVision™ recommend cleaning their Stainless Steel Mirrors with soap and water and then with a soft, lint free, damp cloth.

DO NOT USE:

  • abrasives
  • acids

Polish:
DuraVision™ does not recommend using a commercial Stainless Steel Polish, as the protective layer will leave a residue on the highly polished mirror faces. Rubbing plain white flour on a dry stainless steel mirror face with a dry cloth will polish the mirror to its original brilliance.

Graffiti Removal:
Any graffiti should be removed from the mirror face as soon as possible and preferably within 24 hours with a suitable lacquer thinners. Not all graffiti cleaning agents are suitable. Failure to use an approved cleaning agent may damage the mirror surface.

Download PDF Stainless Steel Mirror Cleaning Guide View