Features
- 2mm acrylic mirror face
- Pure reflective coating
- ACM (Aluminium Composite Material) back for added strength
- Heavy Duty Aluminium with Spring Loaded Locking Pin
- Draw-cord protective bag in heavy duty nylon with fleece liner to protect mirror
- Optional base light with hinge plate provides up-lighting to area required
Suitable Uses
- Inspection of Machinery
- Checking down drains and holes
- Under and around vehicles
- Bomb inspection
- Customs and security checkpoints
- Police and military services
Specifications
International Product Codes
| Product Code | Mirror Size (Dia) | View Distance | Mirror Face | Mirror Back | Handle Length |
|---|---|---|---|---|---|
| HIM150S | 150mm | Up to 2m | 2mm Acrylic | ACM | Short - 60cm-120cm |
| HIM150L | 150mm | Up to 2m | 2mm Acrylic | ACM | Long - 120cm-240cm |
| HIM230S | 230mm | Up to 4m | 2mm Acrylic | ACM | Short - 60cm-120cm |
| HIM230L | 230mm | Up to 4m | 2mm Acrylic | ACM | Long - 120cm-240cm |
Download PDF Information Sheet View
US Product Codes
| Product Code | Mirror Size (Dia) | View Distance | Mirror Face | Mirror Back | Handle Length |
|---|---|---|---|---|---|
| 68722H | 9" | Up to 13' | 2mm Acrylic | ACM | Short - 24"-47" |
| 68723H | 9" | Up to 13' | 2mm Acrylic | ACM | Long - 47"-95" |
Download PDF Information Sheet View
Usage Guides
Positioning
Installation Guide
Inspection Mirror Assembly Guide:
1. If mirror face is not already attached to handle, assemble as per diagram shown below.
2. Tension Nyloc Nut as necessary (do not over tighten, as damage may occur to telescopic handle).
Download PDF Installation Guide View
Cleaning Guide
Acrylic Mirror Cleaning Guide:
General Cleaning:
Convex Security Mirrors recommend cleanning their acrylic mirror faces with soap and water and then with a clean, soft, lint free, damp cloth. Use a non-abrasive polish, such as Johnson’s Pledge or Mr Sheen for a clear bright reflection.
Saturate a clean soft cloth with polish, then spray the mirror face with polish. Wipe the wetted cloth over the mirror surface. With a another clean dry cloth buff the mirror face until it is clear of polish.
DO NOT USE:
- abrasives
- acids
- solvents such as petrol and laquer thinners
Graffiti Removal:
Any graffiti should be removed from the mirror face as soon as possible and preferably within 24 hours. To remove graffiti, use a non-abrasive substance such as De-Solv-it Stain Remover. Not all graffiti cleaning agents are suitable. Failure to use an approved cleaning agent may damage the mirror surface.
Download PDF Cleaning Guide View
