Features
- Unbreakable stainless steel mirror face
- Vinyl celuka back
- Vinyl extrusion
- Includes Outdoor J-Bracket to fix to wall or ceiling
- Wall Mounting screws Not included
- Pole mounting kit available
Suitable Uses
- Industrial Safety
- Vandal Prone Areas
- Driveways and Carparks
- Outdoor Security around Buildings
- Security Checkpoints and Boarder Control
- Livestock Observation and Heat Detection - View Brochure
Specifications
International Product Codes
| Product Code | Size Diameter | View Distance | Mirror Face | Mirror Back | Bracket Length |
|---|---|---|---|---|---|
| 16062S | 600mm | Up to 42m | Stainless Steel | 10mm Vinyl | 335mm |
| 16087S | 800mm | Up to 60m | Stainless Steel | 10mm Vinyl | 435mm |
| 16445S | 1000mm | Up to 65m | Stainless Steel | 10mm Vinyl | 435mm |
Download PDF Information Guide View
US Product Codes
| Product Code | Size Diameter | View Distance | Mirror Face | Mirror Back | Bracket Length |
|---|---|---|---|---|---|
| 66062S | 24" | Up to 140' | Stainless Steel | 10mm Vinyl | 13" |
| 66087S | 32" | Up to 200' | Stainless Steel | 10mm Vinyl | 17" |
| 66445S | 40" | Up to 250' | Stainless Steel | 10mm Vinyl | 17" |
Download PDF Information Guide View
Usage Guides
Positioning
Installation Guide
Outdoor Heavy Duty Convex Mirror Installation Guide:
-
Decide the appropriate place to site the mirror to give maximum vision.
-
Fix J-Bracket to wall, ceiling or pillar using suitable fixing hardware (ie: screws, bolts), allowing enough room to get the mirror on to the J-Bracket.
-
Remove the Adaptor from the J-Bracket.
-
Thread adaptor into the back of the mirror.
-
Make sure the ventilation hole as at the bottom, to allow moisture to drain.
-
Slide the adaptor and mirror over the J-Bracket and adjust mirror to the desired position.
-
Tighten the locking bolt on the adaptor securely.
Installation:
Optional U-Bolts:
Angle and Position:
Download PDF Installation Guide View
Cleaning Guide
Stainless Steel Mirror Cleaning Guide:
General Cleaning:
DuraVision™ recommend cleaning their Stainless Steel Mirrors with soap and water and then with a soft, lint free, damp cloth.
DO NOT USE:
- abrasives
- acids
Polish:
DuraVision™ does not recommend using a commercial Stainless Steel Polish, as the protective layer will leave a residue on the highly polished mirror faces. Rubbing plain white flour on a dry stainless steel mirror face with a dry cloth will polish the mirror to its original brilliance.
Graffiti Removal:
Any graffiti should be removed from the mirror face as soon as possible and preferably within 24 hours with a suitable lacquer thinners. Not all graffiti cleaning agents are suitable. Failure to use an approved cleaning agent may damage the mirror surface.
Download PDF Cleaning Guide View
